# Bibliographic references using Persalys **URL:** \ **Category:** Use cases\ **Created:** [September 21, 2026, 9:13am UTC](https://persalys.discourse.group/t/bibliographic-references-using-persalys/186 "2026-09-21T09:13:17Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![mbaudin47](https://yyz2.discourse-cdn.com/free1/user_avatar/persalys.discourse.group/mbaudin47/32/137_2.png) [@mbaudin47](https://persalys.discourse.group/u/mbaudin47)\ **Post date:** [September 21, 2026, 9:13am UTC](https://persalys.discourse.group/t/bibliographic-references-using-persalys/186/1 "2026-09-21T09:13:17Z")
Hi! I am sometimes asked for a list of bibliographic references making use of Persalys. Here is an attempt to gather these paper, on a yearly basis. This research is based on Google Scholar. If I have missed one relevant paper, please reply below 🙂 Regards, Michaël ### 2017 - The graphical user interface of OpenTURNS, a UQ software in simulation. Baudin, M., Dutfoy, A., Geay, A., Popelin, A. L., Ladier, A., Schueller, J., & Yalamas, T. (2017). UNCECOMP 2017. 15 - 17 June 2017 Rhodes Island, Greece. [THE GRAPHICAL USER INTERFACE OF OPENTURNS, A UQ SOFTWARE IN SIMULATION - UNCECOMP 2017 - EASD Procedia](https://www.eccomasproceedia.org/conferences/thematic-conferences/uncecomp-2017/5366) ### 2019 - OpenTURNS And Its Graphical Interface. Michaël Baudin, Thibault Delage, Anne Dutfoy, Anthony Geay, Ovidiu Mircescu, Aurélie Ladier, Julien Schueller, and Thierry Yalamas. UNCECOMP 2019. 3rd ECCOMAS Thematic Conference on Uncertainty Quantification in Computational Sciences and Engineering. M. Papadrakakis, V. Papadopoulos, G. Stefanou (eds.). Crete, Greece, 24-26 June 2019 [Uncecomp 2019 Proceedings](https://2019.uncecomp.org/proceedings/) ### 2020 - Ardillon, E., & Yang, X. (2020, October). Approche probabiliste pour l’optimisation de la maintenance de composants en acier des centrales nucléaires REP. In _Congrès Lambda Mu 22 «Les risques au cœur des transitions»(e-congrès)-22e Congrès de Maîtrise des Risques et de Sûreté de Fonctionnement, Institut pour la Maîtrise des Risques_. - Ardillon, E., & Semaan, S. Geometry of the Failure Set (System Events): Impact on the Efficiency of Simulation Methods, Adaptations of some Standard Methods. - van den Brule, P. (2020). Modélisation thermo-mécanique par éléments finis d’impression 3D d’alliages métalliques. - Gerrer, C.-E., Blervaque, H., Schueller, J., Bouskela, D., & Girard, S. _Analysis and reduction of models using Persalys_. (2021) ### 2022 - Bryla, P., Ardillon, E., Dumas, A., & Dutfoy-Lebrun, A. (2022, October). Logiciel Persalys-Penstock pour l’estimation de la fiabilité des conduites forcées soumises à la corrosion: développements et applications. In _Congrès Lambda Mu 23 «Innovations et maîtrise des risques pour un avenir durable»-23e Congrès de Maîtrise des Risques et de Sûreté de Fonctionnement_. - Fleurotte, M., Authier, O., Bourbigot, S., Fontaine, G., Debenest, G., & Amokrane, A. (2022). Sensitivity analysis applied to the pyrolysis of charring and non-charring materials under a cone calorimeter. _Journal of Fire Sciences_, _40_(6), 405-443. - Ajenjo, A. (2022). _Info-gap robustness assessment of reliability evaluations for the safety of critical industrial systems_ (Doctoral dissertation, Université Bourgogne Franche-Comté). - Ajenjo, A., Ardillon, E., Chabridon, V., Cogan, S., & Sadoulet-Reboul, E. Adapted line sampling and neural networks for evaluating the info-gap robustness of reliability estimates for penstocks. MascotNum 2022. [https://mascotnum2022.sciencesconf.org/data/pages/46\_Adapted\_line\_sampling\_and\_neural\_networks\_for\_evaluating\_the\_info\_gap\_robustness\_of\_reliability\_estimates\_for\_penstocks\_Ajenjo\_.pdf](https://mascotnum2022.sciencesconf.org/data/pages/46_Adapted_line_sampling_and_neural_networks_for_evaluating_the_info_gap_robustness_of_reliability_estimates_for_penstocks_Ajenjo_.pdf) ### 2023 - Riparbelli, L., Dionisi-Vici, P., Mazzanti, P., Brémand, F., Dupré, J. C., Fioravanti, M., … & Gril, J. (2023). Coupling numerical and experimental methods to characterise the mechanical behaviour of the Mona Lisa: a method to enhance the conservation of panel paintings. _Journal of Cultural Heritage_, _62_, 376-386. [https://www.sciencedirect.com/science/article/pii/S1296207423001127](https://www.sciencedirect.com/science/article/pii/S1296207423001127) - Riparbelli, L., Mazzanti, P., Helfer, T., Manfriani, C., Uzielli, L., Castelli, C., … & Fioravanti, M. (2023). Modelling of hygro-mechanical behaviour of wooden panel paintings: model calibration and artworks characterisation. _Heritage Science_, _11_(1), 126. - Riparbelli, L., Dionisi-Vici, P., Mazzanti, P., Brémand, F., Dupré, J. C., Fioravanti, M., … & Gril, J. (2023). Coupling numerical and experimental methods to characterise the mechanical behaviour of the Mona Lisa: a method to enhance the conservation of panel paintings. _Journal of Cultural Heritage_, _62_, 376-386. - “Marion, A., Dumas, A. (2023), _Studying the robustness of a model with FMI and Persalys_, Modelica Conference” ### 2024 - Salachoris, G. P., Standoli, G., Betti, M., Milani, G., & Clementi, F. (2024). Evolutionary numerical model for cultural heritage structures via genetic algorithms: a case study in central Italy. _Bulletin of Earthquake Engineering_, _22_(7), 3591-3625. [Client Challenge](https://link.springer.com/article/10.1007/s10518-023-01615-z) - Koren, C. (2024, October). salome_cfd: An HPC framework for thermalhydraulics and multiphysics powered by the open-source Computational Fluid Dynamics Toolbox code\_saturne. In \_EPJ Web of Conferences_ (Vol. 302, p. 05005). EDP Sciences. [https://www.epj-conferences.org/articles/epjconf/pdf/2024/12/epjconf\_snamc2024\_05005.pdf](https://www.epj-conferences.org/articles/epjconf/pdf/2024/12/epjconf_snamc2024_05005.pdf) - Amokrane, A., Fleurotte, M., Hodroj, A., Authier, O., Debenest, G., Fontaine, G., & Bourbigot, S. (2024). Influence of parameter variation intervals on pyrolysis sensitivity analysis for charring and non-charring materials. _Journal of Fire Sciences_, _42_(5), 363-404. - Phan, C. (2024, 8 novembre)._Optimisation robuste d’un frein : Vers une analyse fiabiliste_ [Communication orale]. Persalys User’s Day, SETEC, Paris, France. - Borel, P. (2024, 7 novembre)._Sensitivity studies 0D-1D/3D of thermo aeraulic models_ [Communication orale].Persalys User’s Day, Paris, France. - Kerleguer, B. (2024, 8 novembre)._Benchmark of integrated solutions for uncertainty quantification_ [Communication orale]. Persalys User’s Day, Paris, France. - Bryla, P., Ardillon, E., Dutfoy, A., & Dumas, A. (2024, 8 novembre)._Évaluation de la fiabilité des conduites forcées au moyen du modèle Persalys-Penstock_ [Communication orale]. Journée Utilisateurs Persalys, Paris, France. ### 2026 - Braydi, O., Dumas, A., Aroles, A., Schueller, J., Yalamas, T., & Baudin, M. (2026, May). Exploration des capacités de Persalys. In _17ème Colloque National en Calcul des Structures_. [Making sure you're not a bot!](https://hal.science/hal-05631830v1/file/Persalys_CSMA2026_compressed_moyenne.pdf) ---
**Author:** ![dumas](https://yyz2.discourse-cdn.com/free1/user_avatar/persalys.discourse.group/dumas/32/5_2.png) [@dumas](https://persalys.discourse.group/u/dumas)\ **Post date:** [September 24, 2026, 2:34pm UTC](https://persalys.discourse.group/t/bibliographic-references-using-persalys/186/2 "2026-09-24T14:34:34Z")
Hello, You can add to your list the presentations made during the first user day. They are available (except one) in the Github project : [GitHub - persalys/presentation: Presentation about Persalys · GitHub](https://github.com/persalys/presentation) And we also participated to the modelica conference in 2023 in a tutorial session. It was based on the same study you mentioned in 2021 by Gerrer et al. We don’t have a paper but a presentation: “Marion, A., Dumas, A. (2023), _Studying the robustness of a model with FMI and Persalys_, Modelica Conference” If you want, I can send you the presentation (uploading a pdf file here is not allowed) Antoine